Thermal imaging cameras able to measure temperatures.
Monitor critical equipment and protect your perimeter with the same camera
FLIR A-Series can be installed almost anywhere to monitor your critical equipment and other valuable assets. They will safeguard your plant and measure temperature differences to assess the criticality of the situation. This allows you to see problems before they become costly failures, preventing downtime and enhancing worker safety. They can also be used for Security & Surveillance.
Although most of the thermal imaging cameras that are being used in a Security & Surveillance environment do not need to measure temperatures there are some cases in which the ability to measure temperature offers advantages. Definitely when Security & Surveillance needs to be combined with temperature monitoring of critical installations.
A typical example is substation monitoring. With a thermal imaging camera that is able to measure temperatures you can monitor transformers and other substation equipment during daytime. At night, the same thermal imaging camera can be used for perimeter security.
Other examples include waste bunker or coal pile monitoring and any other application where fire prevention needs to be combined with security and surveillance.
FLIR A f-/A pt-Series Technical Specifications
A-Series: general specifications
|Operating temperature range||–25°C to +50°C|
|Encapsulation||IP 66 (IEC 60529)|
|Bump||5 g, 11 ms (IEC 60068-2-27)|
|Area||10 boxes with max./min./average/position|
|Isotherm||1 with above/below/interval|
|Measurement option||Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)|
|Difference temperature||Delta temperature between measurement functions or reference temperature|
|Reference temperature||Manually set or captured from any measurement function|
|Atmospheric transmission correction||Automatic, based on inputs for distance, atmospheric temperature and relative humidity|
|Optics transmission correction||Automatic, based on signals from internal sensors|
|Emissivity correction||Variable from 0.01 to 1.0|
|Reflected apparent temperature correction||Automatic, based on input of reflected temperature|
|External optics/windows correction||Automatic, based on input of optics/window transmission and temperature|
|Measurement corrections||Global and individual object parameters|
|Alarm functions||6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer|
|Ethernet||Control, result and image|
FLIR A310 f / A310 pt: version specific specifications
|FLIR A310 f||FLIR A310 pt – Pan/tilt|
|Weight||5 kg||17.9 kg|
|Camera size (L × W × H)||460 × 140 × 159 mm||460 x 467 x 326 mm|
|Automatic heaters||Clears ice from window||Clears ice from window|
|Azimuth range||N/A||Az velocity 360º continuous, 0.1 to 60º/sec max.|
|Elevation range||N/A||El velocity +/- 45º, 0.1 to 30º/sec. max.|
|Ethernet video streaming|
|Ethernet, video streaming||MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5||Two independent channels for each camera -MPEG-4, H.264 or M-JPEG|
|External power operation||12/24 VDC (10-30 VDC), 24 W absolute max||24 VAC (21-30 VAC) 24 VDC (21-30 VDC)|
|Consumption||24 VAC: 215 VA max w/heater
24 VDC: 195 W max w/heater
|Alarm output||Digital Out, log, store image, file sending (ftp), email (SMTP), notification||N/A|
|Ethernet, protocols||Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP||TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, DHCP, uPnP|
|Ethernet, image streaming||16-bit 320 x 240 pixels at 7-8 Hz|